Device for precise and stable temperature control of eluents for preparative chromatography
- Stainless steel DIN 1.4404
- Maximum flow rate: 300 ml/min
- Maximum operating pressure: 400 bar
- Temperature range: RT – 100 °C
- Dead-Volume: ca. 6.5 ml
- Heating Power: 1000 W
- Connections for heating sleeves
Standard equipment:
2 x Heating e.g. eluent heater + column heating jacket
2 x Temperature measurement
Special equipment:
Maximum 8 x heating control or temperature measurement
Temperature settings and display:
Manually via touch screen
Via network or RS-232
Via software: PrepCon or SCPA Templogger
Sensors: Pt100
Control accuracy: typical +0.5%
Calibration of all temperature sensors and heating controllers by the end user possible
| Temperature control range | Room temperature (RT) bis 100°C |
| Heating power | 1000 W |
| Heating distance | 6.5 Meter Stainless steel capillary |
| Flowrate | up to approx. 300 ml/min |
| Capillaries | 1/16″ mit 1.0 mm Inner diameter |
| Capillary connection | UNF 10-32 Female thread |
| Dead volume | approx. 4.5 ml |
| Wetted materials | Stainless steel DIN 1.4404 | AISI/SAE 316L (Titanium possible on request) |
| System protection | Thermal insulation, temperature protection switch (110°C) |
| Dimensions (H x B x T) | 18 x 30 x 28 cm (34 cm with connectors) |
| Weight | 13 kg |
| Temperature acquisition | Pt100 Resistance thermometer |
| Channels | Any combination of up to 8 control and display channels possible, maximum 4 operable via touch screen |
| Communication | Ethernet or RS-232 (Serial) |
| Power consumption | 1050 W |
| Power supply | 230 V AC |